Loading...
U.S. exports of cold-rolled alloy steel (non-stainless), flat-rolled, 600 mm or more wide (HS 722550) totaled $25.3M in July 2026.
Importers of Cold-Rolled Alloy Steel (Non-Stainless), Flat-Rolled, 600 mm or More Wide paid $3.1M in duties in July 2026 — an effective duty rate of 50% on $6.3M in dutiable value, based on actual customs collections rather than the published tariff schedule. Cold-Rolled Alloy Steel (Non-Stainless), Flat-Rolled, 600 mm or More Wide imports of $6.6M in July 2026 ran 17% below the year-to-date monthly average of $7.9M.
Last updated: July 2026 dataCold-rolled alloy steel strip and sheet 600 mm or wider — covering grades from ball-bearing and tool steel to heat-resistant and high-nickel alloys — is used in precision components, automotive parts, and advanced manufacturing where tight dimensional tolerances and superior surface finish are required. Seven 10-digit tariff lines (7225500002 through 7225508080) differentiate by alloy type and thickness, with the 4.75 mm threshold again serving as a key breakpoint. Sweden and the Netherlands lead US imports under this heading, with South Korea, Canada, and Japan also significant sources. Section 232 tariffs apply, and importers of high-nickel or heat-resistant grades should verify whether any antidumping orders are in force for the relevant origin.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
180 shipments/mo
Classification as heat-resistant steel (line 7225507000) requires demonstrating that the alloy composition meets the metallurgical definition — typically high chromium and/or nickel content conferring oxidation resistance at elevated temperatures. Mill test reports showing chemical composition and, where applicable, relevant ASTM or EN material designations are the standard supporting documentation.
South Korea is subject to Section 232 steel tariffs, and certain cold-rolled steel products from Korea have historically been subject to antidumping and countervailing duty orders. Importers should check the current scope of any active orders against the specific alloy grade and HTS line, and should be prepared for potential scope rulings if the product's alloy content places it near a classification boundary.
HSChapter 72
Subheading 5 of 8 in heading 7225
Subheading 722550 · $6.6M of $89.7M
Supplier Network
Get discovered by U.S. importers searching for HS 722550 — Cold-Rolled Alloy Steel (Non-Stainless), Flat-Rolled, 600 mm or More Wide. Be the first supplier listed.
HS10 import codes under this HS6 parent, each with its own page. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Import Value | Effective Tariff % | Dutiable Share | Duty Collected |
|---|---|---|---|---|---|
| 7225508080 | Fr Cr Alloy Stl Gt 600mm Wide, Lt 4.75mm Thk NESOI | $9.6M | 48.99% | 97.99% | $4.7M |
| 7225501160 | Fr Tool Stl Nt Hspd Nt Bl-Brng 600mm W Ao Cld-Rold | $32K | 50.00% | 100.00% | $16K |
| 7225506000 | Fr Oth Alloy Stl 600mm W Ao Cr 4.75mm Ao Thck | $3K | 0.00% | 0.00% | -- |
| 7225508010 | Oth Alloy Stl Fr Hi-Nckl 600mm Ao Cr Un 4.75mm Thk | $3K | 50.02% | 100.00% | $1K |
HS10 export codes under this HS6 parent, each with its own page. Source: U.S. Schedule B export classification.
| Code | Description | Export Value |
|---|---|---|
| 7225500002 | Flat-Roll,Other Alloy Steel Ge 600mm Wid,Cold-Roll | $22.7M |
Import lines come from the U.S. Harmonized Tariff Schedule and export lines from Schedule B. The two are numbered by different agencies, so the same 10-digit code can appear in both tables describing a different product.
ImportsExports
Imports
$6.6MYoY · Pro
Exports
$25.3MYoY · Pro
12-mo low · imports
YoY · ProThrough July 2026. Source: U.S. Census Bureau.
Exports · July 2026
destination
Mexico and Canada together take 100% of it.
customs district
origin
entry
rate provision · imports
3.9% enters free of duty; the effective duty rate is 48.02%.