Loading...
HSChapter 72
U.S. imports of hot-rolled flat steel coils, under 3 mm thick (non-alloy, 600 mm+ wide) (HS 720839) totaled $28.1M in June 2026, traded with 12 countries.
Importers of Hot-Rolled Flat Steel Coils, Under 3 mm Thick (Non-Alloy, 600 mm+ Wide) paid $9.1M in duties in June 2026 — an effective duty rate of 32% on $28.1M in dutiable value, based on actual customs collections rather than the published tariff schedule. Hot-Rolled Flat Steel Coils, Under 3 mm Thick (Non-Alloy, 600 mm+ Wide) imports of $28.1M in June 2026 ran 34% above the year-to-date monthly average of $21.0M.
Thin hot-rolled non-alloy steel coils below 3 mm — not pickled — are used in light structural applications, tubing, and as feedstock where mill-scale surface is acceptable. The US schedule for this heading is the most granular in the 7208 group, with six 10-digit lines covering AHSS/UHSS grades (7208390020), multiple high-strength tiers (7208390015, 7208390025), untrimmed-edge coils (7208390030), and standard non-alloy variants (7208390050, 7208390090). South Korea leads US supply, followed by Canada, the Netherlands, Mexico, and Egypt — a supplier mix that includes origins with active antidumping exposure. The AHSS/UHSS line reflects growing automotive lightweighting demand and requires precise mill certification to support classification.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
The AHSS/UHSS line requires mill test reports confirming both the minimum yield/tensile strength thresholds and the microstructural grade designation (e.g., dual-phase, martensitic, or press-hardening steel). Standard high-strength grades that meet yield requirements but lack the advanced microstructural characteristics would fall under 7208390015 or 7208390025. Importers should obtain explicit grade designations from the mill and have a customs broker review the CMTR before entry.
Egypt has expanded flat-rolled steel export capacity in recent years, making it a growing source for thin hot-rolled coils. Importers sourcing from Egypt should verify whether any antidumping or countervailing duty investigations or orders apply to the specific product, and should conduct origin verification to ensure the steel was produced in Egypt rather than transshipped from a country subject to existing orders.
FLT RLD IRON/STL GT=600MM;LT 3MM THK; UNTRIM EDGE
HS 7208390030
FLT RLD IRN/NALLOY STL GT=600MM;LT 3MM THICK;NESOI
HS 7208390090
FLT RLD IRN/STL 600MM,LT 3MM THK,NOT CLAD,HOTRL
HS 7208390050
FLAT-RLD HI-STR STEEL IN COILS HOT-RLD LT 3 MM THK
HS 7208390015
FLAT-RLD HI-STR STEEL IN COILS HOT-RLD LT 3 MM NES
HS 7208390025
Supplier Network
Get discovered by U.S. importers searching for HS 720839 — Hot-Rolled Flat Steel Coils, Under 3 mm Thick (Non-Alloy, 600 mm+ Wide). Be the first supplier listed.
| Country | Imports | Exports | Balance |
|---|---|---|---|
| JAPAN | $11.6M | -- | -$11.6M |
| VIETNAM | $9.6M | -- | -$9.6M |
| MEXICO | $2.0M | $2.1M | +$96K |
| CANADA | $160K | $2.2M | +$2.0M |
| NETHERLANDS | $2.2M | -- | -$2.2M |
Monthly import values over time
HS10 import codes under this HS6 parent, each with its own page. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Import Value | Effective Tariff % | Dutiable Share | Duty Collected |
|---|---|---|---|---|---|
| 7208390030 | FLT RLD IRON/STL GT=600MM;LT 3MM THK; UNTRIM EDGE | $15.2M | 50.00% | 100.00% | $7.6M |
| 7208390090 | FLT RLD IRN/NALLOY STL GT=600MM;LT 3MM THICK;NESOI | $11.3M | 5.98% | 100.00% | $674K |
| 7208390025 | FLAT-RLD HI-STR STEEL IN COILS HOT-RLD LT 3 MM NES | $1.6M | 50.00% | 100.00% | $823K |
| 7208390020 | FLAT-RLD AHSS OR UHSS IN COILS HOT-RLD LT 3 MM NES | $0 | -- | -- | -- |
HS10 export codes under this HS6 parent, each with its own page. Source: U.S. Schedule B export classification.
| Code | Description | Export Value |
|---|---|---|
| 7208390050 | FLT RLD IRN/STL 600MM,LT 3MM THK,NOT CLAD,HOTRL | $2.3M |
| 7208390015 | FLAT-RLD HI-STR STEEL IN COILS HOT-RLD LT 3 MM THK | $2.0M |
NONALLOY PIG IRON 0.5 PRCNT OR LESS PHOSPHORUS
HS 720110
SMFD IRN/NAL STL LT .25 PCT CRB RECT CS WID 2X THK
HS 720712
SEMIFINISHED PRODUCTS OF ALLOY STEEL NOT STAINLESS
HS 722490
FERROCHROMIUM OVER 4 PERCENT CARBON
HS 720241
FR IOS NAL 600MM AO W TIN CTD OR PLTD UNDR 0.5MM T
HS 721012
FERROUS WASTE & SCRAP NESOI
HS 720449
| State | Imports | Exports | Balance |
|---|---|---|---|
| Texas | $12.3M | $1.6M | -$10.7M |
| Washington | $11.6M | -- | -$11.6M |
| Ohio | $2.3M | $209K | -$2.1M |
| Port | Imports | Exports | Balance |
|---|---|---|---|
| KALAMA, WA | $11.6M | -- | -$11.6M |
| HOUSTON, TX | $5.5M | -- | -$5.5M |
| NEW ORLEANS, LA | $5.5M | -- | -$5.5M |