Loading...
U.S. exports of hot-rolled stainless steel flat-rolled coils, 600 mm+ wide, under 3 mm thick (HS 721914) totaled $3.5M in July 2026.
Importers of Hot-Rolled Stainless Steel Flat-Rolled Coils, 600 mm+ Wide, Under 3 mm Thick paid $45K in duties in July 2026 — an effective duty rate of 50% on $91K in dutiable value, based on actual customs collections rather than the published tariff schedule. Hot-Rolled Stainless Steel Flat-Rolled Coils, 600 mm+ Wide, Under 3 mm Thick imports of $91K in July 2026 ran 51% below the year-to-date monthly average of $186K.
Last updated: July 2026 dataHot-rolled stainless steel coils under 3 mm thick represent the thinnest gauge produced directly on a hot-rolling mill without subsequent cold reduction, and they serve as feedstock for cold-rolling lines as well as direct inputs for lighter fabricated parts. The US schedule subdivides this heading by width — with line 7219140030 covering 1,370 mm and wider coils, a dedicated high-nickel line (7219140065), and a residual line (7219140090) for the 600–under 1,370 mm width range. Brazil and Spain lead supply, with Lithuania, China, and Taiwan also present — a notably diverse origin mix that importers should monitor for Section 232 applicability and any antidumping orders affecting specific origins.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
4 shipments/mo
Hot-rolled coils under 3 mm retain the characteristic surface scale and slightly looser dimensional tolerances of the hot-rolling process, whereas cold-rolled coils of the same thickness have been further reduced at ambient temperature, yielding a smoother surface finish, tighter thickness tolerances, and improved mechanical properties. End-users requiring tight flatness or surface quality for visible applications typically specify cold-rolled product; hot-rolled at this gauge is more common as cold-mill feedstock or for industrial applications where surface finish is secondary.
Trade remedy orders on stainless steel flat-rolled products have historically targeted several origins. Importers sourcing from China, Taiwan, or other countries should check the current scope of any active antidumping or countervailing duty orders with CBP or a licensed customs broker before entry, as scope rulings can extend to specific thickness ranges and alloy grades.
HSChapter 72
Subheading 14 of 14 in heading 7219
Subheading 721914 · $91K of $72.3M
Supplier Network
Get discovered by U.S. importers searching for HS 721914 — Hot-Rolled Stainless Steel Flat-Rolled Coils, 600 mm+ Wide, Under 3 mm Thick. Be the first supplier listed.
ImportsExports
Imports
$91KYoY · Pro
Exports
$3.5MYoY · Pro
12-mo low · imports
YoY · ProThrough July 2026. Source: U.S. Census Bureau.
HS10 import codes under this HS6 parent, each with its own page. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Import Value | Effective Tariff % | Dutiable Share | Duty Collected |
|---|---|---|---|---|---|
| 7219140090 | Stnls Stl Fr 600-Un 1370mm W Hr Cls Un 3mm Th,Othr | $91K | 50.02% | 100.00% | $45K |
| 7219140030 | Fr Ss 1370mm Ao W Hr Cls Un 3mm Thck | $0 | -- | -- | -- |
HS10 export codes under this HS6 parent, each with its own page. Source: U.S. Schedule B export classification.
| Code | Description | Export Value |
|---|---|---|
| 7219140000 | Flt Rol,Stnls Stl Gt 600mm,Hotrol,Coil Lt 3mm Thck | $3.5M |
Import lines come from the U.S. Harmonized Tariff Schedule and export lines from Schedule B. The two are numbered by different agencies, so the same 10-digit code can appear in both tables describing a different product.
Exports · July 2026
destination
Mexico and Canada together take 100% of it.
customs district
origin
entry
rate provision · imports
the effective duty rate is 50.02%.