Loading...
HSChapter 72
U.S. imports of hot-rolled stainless steel flat-rolled coils, 600 mm+ wide, 3–under 4.75 mm thick (HS 721913) totaled $143K in April 2026, traded with 9 countries.
Importers of Hot-Rolled Stainless Steel Flat-Rolled Coils, 600 mm+ Wide, 3–Under 4.75 mm Thick paid $69K in duties in April 2026 — an effective duty rate of 48% on $143K in dutiable value, based on actual customs collections rather than the published tariff schedule. Hot-Rolled Stainless Steel Flat-Rolled Coils, 600 mm+ Wide, 3–Under 4.75 mm Thick imports of $143K in April 2026 ran 54% below the year-to-date monthly average of $313K.
Last updated: April 2026 dataStainless steel hot-rolled coils in the 3–4.75 mm thickness range occupy a transitional gauge — thick enough for direct fabrication into structural components yet thin enough to serve as cold-rolling feedstock for appliance and automotive trim applications. South Africa and Indonesia are the leading suppliers to the US market under this heading, with Taiwan and Canada also contributing; the geographic spread reflects both ferrochrome-integrated production in southern Africa and large-scale stainless rolling capacity in Southeast Asia. Section 232 tariffs apply, and the US lines further subdivide by width band and nickel content, making accurate mill test documentation essential at entry.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
South Africa holds some of the world's largest ferrochrome reserves, giving its integrated stainless producers a cost advantage in chromium-intensive grades. This upstream integration supports competitive pricing on hot-rolled coils in the 3–4.75 mm range, particularly for standard austenitic grades used in general fabrication.
Heading 721913 covers coils that are 3 mm or more but under 4.75 mm thick. A coil measuring exactly 4.75 mm falls into heading 721912, which covers 4.75 mm up to and including 10 mm. Precise thickness measurement at the mill, confirmed on the MTC, is therefore critical for correct classification at the boundary.
Supplier Network
Get discovered by U.S. importers searching for HS 721913 — Hot-Rolled Stainless Steel Flat-Rolled Coils, 600 mm+ Wide, 3–Under 4.75 mm Thick. Be the first supplier listed.
Monthly import values over time
HS10 import codes under this HS6 parent. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Import Value | Effective Tariff % | Duty Collected |
|---|---|---|---|---|
| 7219130081 | FR SS CLS, OTH, 600-UN 1370 MM W HR NCKL CONTNT N | $143K | 48.30% | $69K |
| 7219130002 | FR SS CLS 600MM W HR 3-UN 4.75MM THK ETC | $0 | -- | -- |
| 7219130031 | FR SS HR CL 3-UN 4.75MM THCK NESOI 1370 MM WD OM | $0 | -- | -- |
| 7219130071 | FR SS HR CL 3-4.75MMTHK LT1370MMWD 0.5-24%NI NESOI | $0 | -- | -- |
FR SS CLS, OTH, 600-UN 1370 MM W HR NCKL CONTNT N
FR SS CLS 600MM W HR 3-UN 4.75MM THK ETC
FR SS HR CL 3-UN 4.75MM THCK NESOI 1370 MM WD OM
FR SS HR CL 3-4.75MMTHK LT1370MMWD 0.5-24%NI NESOI
HS10 export codes under this HS6 parent. Source: U.S. Schedule B export classification.
| Code | Description | Export Value |
|---|---|---|
| 7219130000 | FLT-ROLL,STNLS STL GT 600MM,HOT-ROL,COIL(3-4.75MM) | $22.4M |
FLT-ROLL,STNLS STL GT 600MM,HOT-ROL,COIL(3-4.75MM)
13.5M kg
NONALLOY PIG IRON 0.5 PRCNT OR LESS PHOSPHORUS
HS 720110
SEMIFINISHED PRODUCTS OF ALLOY STEEL NOT STAINLESS
HS 722490
SMFD IRN/NAL STL LT .25 PCT CRB RECT CS WID 2X THK
HS 720712
FR IOS NAL 600MM AO W TIN CTD OR PLTD UNDR 0.5MM T
HS 721012
FERROUS WASTE & SCRAP NESOI, TURNINGS, CHIPS ETC
HS 720441
FERROUS WASTE & SCRAP NESOI
HS 720449
| Port | Imports | Exports | Balance |
|---|---|---|---|
| MOBILE, AL | -- | $22.3M | +$22.3M |
| HOUSTON, TX | $115K | $69K | -$47K |
| DETROIT, MI | $23K | -- | -$23K |