Loading...
HSChapter 72
U.S. imports of flat-rolled high-strength iron or nonalloy steel, under 600mm wide, hot-rolled, 4.75mm or more thick (HS 721114) totaled $7.4M in June 2026, traded with 8 countries.
Importers of Flat-Rolled High-Strength Iron or Nonalloy Steel, Under 600mm Wide, Hot-Rolled, 4.75mm or More Thick paid $3.7M in duties in June 2026 — an effective duty rate of 50% on $7.3M in dutiable value, based on actual customs collections rather than the published tariff schedule. Flat-Rolled High-Strength Iron or Nonalloy Steel, Under 600mm Wide, Hot-Rolled, 4.75mm or More Thick imports of $7.4M in June 2026 ran 10% above the year-to-date monthly average of $6.8M.
Hot-rolled high-strength nonalloy steel strip and bar in widths under 600mm and thicknesses of 4.75mm or more is a workhorse input for automotive frame components, agricultural equipment, and structural fabrications requiring elevated yield strength without alloy additions. The US schedule subdivides this heading across four lines — 7211140000, 7211140030, 7211140045, and 7211140090 — distinguishing high-strength grades and coil versus non-coil form. Canada and Mexico are the leading suppliers, with Germany and China also significant sources. Section 232 tariffs apply, and antidumping orders on hot-rolled steel from certain origins warrant review before importation.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
Line 7211140045 captures non-coil (cut-to-length) product, while 7211140090 covers coil form. The physical presentation at the time of importation — not the intended downstream use — determines which line applies, so importers should confirm with their supplier whether the steel ships on coils or as flat plates.
A mill test certificate (MTC) showing the mechanical properties — specifically minimum yield strength meeting the applicable high-strength threshold — is the standard supporting document. CBP may request the MTC to verify that the product meets the grade criteria for the high-strength-specific line rather than the general hot-rolled line.
Supplier Network
Get discovered by U.S. importers searching for HS 721114 — Flat-Rolled High-Strength Iron or Nonalloy Steel, Under 600mm Wide, Hot-Rolled, 4.75mm or More Thick. Be the first supplier listed.
Monthly import values over time
HS10 import codes under this HS6 parent, each with its own page. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Import Value | Effective Tariff % | Dutiable Share | Duty Collected |
|---|---|---|---|---|---|
| 7211140090 | FLT RLD IR/STL;COIL;HOT RLD;LT 600MM;GT=4.75MM THK | $7.0M | 49.08% | 98.08% | $3.5M |
| 7211140045 | FLT RLD IR/NALLOY STL;LT 600MM;GT=4.75MMTHK;N COIL | $312K | 48.80% | 98.36% | $152K |
| 7211140030 | FLT RLD HISTRG STEEL;LT 600MM;HOT RLD;GT=4.75MMTHK | $102K | 50.00% | 100.00% | $51K |
HS10 export codes under this HS6 parent, each with its own page. Source: U.S. Schedule B export classification.
| Code | Description | Export Value |
|---|---|---|
| 7211140000 | FLT RLD IRON/STL LT 600MM,HOT-ROLLD,GE 4.75MM THCK | $3.6M |
NONALLOY PIG IRON 0.5 PRCNT OR LESS PHOSPHORUS
HS 720110
SMFD IRN/NAL STL LT .25 PCT CRB RECT CS WID 2X THK
HS 720712
SEMIFINISHED PRODUCTS OF ALLOY STEEL NOT STAINLESS
HS 722490
FERROCHROMIUM OVER 4 PERCENT CARBON
HS 720241
FR IOS NAL 600MM AO W TIN CTD OR PLTD UNDR 0.5MM T
HS 721012
FERROUS WASTE & SCRAP NESOI
HS 720449
| Port | Imports | Exports | Balance |
|---|---|---|---|
| BUFFALO-NIAGARA FALLS, NY | $6.9M | $272K | -$6.6M |
| LAREDO, TX | $61K | $2.0M | +$1.9M |
| DETROIT, MI | $68K | $641K | +$573K |