Loading...
HSChapter 72
U.S. imports of cold-rolled flat-rolled stainless steel, 600 mm or more wide, 0.5 mm to 1 mm thick (HS 721934) totaled $15.8M in April 2026, traded with 20 countries.
Importers of Cold-Rolled Flat-Rolled Stainless Steel, 600 mm or More Wide, 0.5 mm to 1 mm Thick paid $7.6M in duties in April 2026 — an effective duty rate of 49% on $15.4M in dutiable value, based on actual customs collections rather than the published tariff schedule.
Last updated: April 2026 dataThin-gauge cold-rolled stainless in the 0.5–1 mm range is a precision product used in cookware, consumer electronics housings, medical device components, and decorative trim. The US schedule subdivides this heading by nickel content, chromium level (with a specific line for material under 15% chromium), and coil versus non-coil form. Vietnam leads US imports at this gauge, with Taiwan and Spain also significant — a supplier mix that reflects both high-volume commodity production and European specialty rolling capacity.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
Most standard austenitic and ferritic stainless steels contain 16%–26% chromium, so the sub-15% chromium line (7219340030) captures lower-alloy grades that may be used in specific industrial or decorative applications. Importers of these grades should confirm chromium content on the mill certificate, as misclassification into a standard stainless line could trigger incorrect duty treatment.
Coiled and non-coiled forms are classified under separate 10-digit lines within 721934. A mixed shipment must be declared on separate HTS lines with quantities and values allocated to each form. Combining them under a single line is a classification error that can result in a CBP penalty or a request for a prior disclosure.
Supplier Network
Get discovered by U.S. importers searching for HS 721934 — Cold-Rolled Flat-Rolled Stainless Steel, 600 mm or More Wide, 0.5 mm to 1 mm Thick. Be the first supplier listed.
Monthly import values over time
HS10 import codes under this HS6 parent. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Import Value | Effective Tariff % | Duty Collected |
|---|---|---|---|---|
| 7219340025 | FR SS CLS 600MM THKNS= 0.5-1MM GT 0.5% NCKL,NESO | $6.8M | 50.00% | $3.2M |
| 7219340050 | FR SS 600MM AO W CR 0.5-NOV 1MM THCK NT COILED | $6.1M | 48.55% | $2.9M |
| 7219340035 | FR SS CLS 600MM AO W CR 0.5-1MM THCK, NESOI | $2.4M | 49.86% | $1.2M |
| 7219340020 | FR SS CLS 600MM,THK=0.5-1MM LT .5%NCKL,&(1.5-5%MB) | $521K | 50.00% | $297K |
| 7219340030 | FR SS CLS 600MM AO W CR 0.5-1MM TH UN 15% CHROMIUM | $68K | 0.00% | -- |
FR SS CLS 600MM THKNS= 0.5-1MM GT 0.5% NCKL,NESO
FR SS 600MM AO W CR 0.5-NOV 1MM THCK NT COILED
FR SS CLS 600MM AO W CR 0.5-1MM THCK, NESOI
FR SS CLS 600MM,THK=0.5-1MM LT .5%NCKL,&(1.5-5%MB)
FR SS CLS 600MM AO W CR 0.5-1MM TH UN 15% CHROMIUM
HS10 export codes under this HS6 parent. Source: U.S. Schedule B export classification.
| Code | Description | Export Value |
|---|---|---|
| 7219340000 | FLAT-ROL,STNLS STL, GE 600MM,COLD-ROLL(.5-1MM)THK | $9.1M |
FLAT-ROL,STNLS STL, GE 600MM,COLD-ROLL(.5-1MM)THK
2.6M kg
NONALLOY PIG IRON 0.5 PRCNT OR LESS PHOSPHORUS
HS 720110
SEMIFINISHED PRODUCTS OF ALLOY STEEL NOT STAINLESS
HS 722490
SMFD IRN/NAL STL LT .25 PCT CRB RECT CS WID 2X THK
HS 720712
FR IOS NAL 600MM AO W TIN CTD OR PLTD UNDR 0.5MM T
HS 721012
FERROUS WASTE & SCRAP NESOI, TURNINGS, CHIPS ETC
HS 720441
FERROUS WASTE & SCRAP NESOI
HS 720449
| State | Imports | Exports | Balance |
|---|---|---|---|
| Kentucky | $139K | $4.2M | +$4.1M |
| New Jersey | $3.3M | $212K | -$3.1M |
| Illinois | $2.1M | $565K | -$1.6M |
| Port | Imports | Exports | Balance |
|---|---|---|---|
| NEWARK, NJ | $5.9M | -- | -$5.9M |
| LAREDO, TX | $563K | $3.0M | +$2.4M |
| BALTIMORE, MD | $2.5M | -- | -$2.5M |