Loading...
HSChapter 72
U.S. imports of hot-rolled pickled flat steel coils, 3 mm to under 4.75 mm thick (non-alloy, 600 mm+ wide) (HS 720826) totaled $1.4M in April 2026, traded with 7 countries.
Importers of Hot-Rolled Pickled Flat Steel Coils, 3 mm to Under 4.75 mm Thick (Non-Alloy, 600 mm+ Wide) paid $717K in duties in April 2026 — an effective duty rate of 50% on $1.4M in dutiable value, based on actual customs collections rather than the published tariff schedule. Hot-Rolled Pickled Flat Steel Coils, 3 mm to Under 4.75 mm Thick (Non-Alloy, 600 mm+ Wide) imports of $1.4M in April 2026 ran 29% above the year-to-date monthly average of $1.1M.
Last updated: April 2026 dataPickled hot-rolled coils in the 3–4.75 mm thickness band occupy a critical intermediate gauge widely used in pipe and tube manufacturing, agricultural equipment, and general structural fabrication. The two US tariff lines — 7208260030 for high-strength steel and 7208260060 for standard non-alloy coils — require careful separation based on certified mechanical properties. Canada and the Netherlands are the leading suppliers, with Belgium, South Korea, and Japan also prominent sources. Section 232 measures apply broadly to this product category, and antidumping orders on certain origins add another layer of entry-cost analysis.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
A certified mill test report (CMTR) showing yield strength, tensile strength, and elongation values is the primary document. CBP may request this during examination or in a CF-28 request for information; having it ready at time of entry reduces clearance delays.
Rotterdam and Antwerp serve as major steel distribution and processing hubs for European mill output. Coils produced in Germany, France, or other EU countries are frequently consolidated and re-exported through these ports, so the declared country of origin may differ from the port of lading — a distinction that matters for antidumping and Section 232 country-of-origin determinations.
Monthly import values over time
Supplier Network
Get discovered by U.S. importers searching for HS 720826 — Hot-Rolled Pickled Flat Steel Coils, 3 mm to Under 4.75 mm Thick (Non-Alloy, 600 mm+ Wide). Be the first supplier listed.
| Country | Imports | Exports | Balance |
|---|---|---|---|
| MEXICO | $273K | $8.8M | +$8.5M |
| CANADA | $175K | $3.7M | +$3.5M |
| NETHERLANDS | $599K | -- | -$599K |
| GERMANY | $361K | -- | -$361K |
| JAPAN | $27K | $17K | -$10K |
HS10 import codes under this HS6 parent. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Import Value | Effective Tariff % | Duty Collected |
|---|---|---|---|---|
| 7208260060 | FLT RLD IOS NA CLS,GT/=600MM,PKLD,3-4.75MMTHCK | $761K | 50.00% | $380K |
| 7208260030 | FLT-RLD HI-STR STL CLS HOT-RLD PICKLD 3-4.75MM THK | $673K | 50.00% | $337K |
FLT RLD IOS NA CLS,GT/=600MM,PKLD,3-4.75MMTHCK
FLT-RLD HI-STR STL CLS HOT-RLD PICKLD 3-4.75MM THK
HS10 export codes under this HS6 parent. Source: U.S. Schedule B export classification.
| Code | Description | Export Value |
|---|---|---|
| 7208260030 | FLT-RLD HI-STR STL CLS HOT-RLD PICKLD 3-4.75MM THK | $7.8M |
| 7208260060 | FLT RLD NA CLS,GT=600MM,PKLD,3-4.75MMTHCK | $4.7M |
FLT-RLD HI-STR STL CLS HOT-RLD PICKLD 3-4.75MM THK
7.5M kg
FLT RLD NA CLS,GT=600MM,PKLD,3-4.75MMTHCK
4.0M kg
NONALLOY PIG IRON 0.5 PRCNT OR LESS PHOSPHORUS
HS 720110
SEMIFINISHED PRODUCTS OF ALLOY STEEL NOT STAINLESS
HS 722490
SMFD IRN/NAL STL LT .25 PCT CRB RECT CS WID 2X THK
HS 720712
FR IOS NAL 600MM AO W TIN CTD OR PLTD UNDR 0.5MM T
HS 721012
FERROUS WASTE & SCRAP NESOI, TURNINGS, CHIPS ETC
HS 720441
FERROUS WASTE & SCRAP NESOI
HS 720449
| State | Imports | Exports | Balance |
|---|---|---|---|
| Alabama | -- | $4.6M | +$4.6M |
| Ohio | $502K | $3.3M | +$2.8M |
| South Carolina | -- | $1.1M | +$1.1M |
| Port | Imports | Exports | Balance |
|---|---|---|---|
| LAREDO, TX | $273K | $3.3M | +$3.1M |
| DETROIT, MI | $101K | $3.3M | +$3.2M |
| MOBILE, AL | -- | $3.4M | +$3.4M |