Loading...
HSChapter 72
U.S. imports of hot-rolled iron or nonalloy steel bars and rods in irregular coils, nesoi (14 mm diameter and above) (HS 721399) totaled $3.7M in June 2026, traded with 6 countries.
Importers of Hot-Rolled Iron or Nonalloy Steel Bars and Rods in Irregular Coils, NESOI (14 mm Diameter and Above) paid $1.8M in duties in June 2026 — an effective duty rate of 50% on $3.7M in dutiable value, based on actual customs collections rather than the published tariff schedule. Hot-Rolled Iron or Nonalloy Steel Bars and Rods in Irregular Coils, NESOI (14 mm Diameter and Above) imports of $3.7M in June 2026 ran 18% below the year-to-date monthly average of $4.4M.
Larger-diameter hot-rolled rod coil — 14 mm and above in circular cross-section — serves forging, cold-finishing, and structural fabrication end uses where greater cross-sectional area is required compared to wire rod feedstock. The US schedule breaks this residual heading by diameter band: 14–19 mm (7213990030), 19 mm and above (7213990060), and a further NESOI line (7213990090), with a legacy catch-all (7213990000) also present. Japan leads declared supply, followed by Canada and Egypt, a sourcing mix that reflects both proximity and active AD/CVD order landscapes.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
Heading 721391 covers circular cross-section rod coil with a diameter strictly less than 14 mm, while heading 721399 captures 14 mm and above (as well as non-circular cross-sections not covered by other headings). The measured diameter of the finished rod at the time of importation — not the nominal order size — governs classification, so dimensional mill certificates are essential documentation.
Egypt has been named in antidumping proceedings on certain steel bar and rod products in the past. Importers sourcing from Egypt should check the current status of any active AD/CVD orders covering this product with the USITC and Department of Commerce, and should obtain a scope ruling if the product's specifications are near the boundary of an existing order's description.
Supplier Network
Get discovered by U.S. importers searching for HS 721399 — Hot-Rolled Iron or Nonalloy Steel Bars and Rods in Irregular Coils, NESOI (14 mm Diameter and Above). Be the first supplier listed.
Monthly import values over time
| Country | Imports | Exports | Balance |
|---|---|---|---|
| CANADA | $2.0M | $509K | -$1.4M |
| JAPAN | $1.7M | -- | -$1.7M |
| MEXICO | $3K | $191K | +$188K |
| CHINA | -- | $27K | +$27K |
| DOMINICAN REPUBLIC | -- | $16K | +$16K |
HS10 import codes under this HS6 parent, each with its own page. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Import Value | Effective Tariff % | Dutiable Share | Duty Collected |
|---|---|---|---|---|---|
| 7213990030 | BARS&RODS IRON/NALLOY STEEL; 14MM-19MM; NESOI | $2.6M | 50.00% | 100.00% | $1.3M |
| 7213990060 | BARS & RODS IRON/NALLOY STEEL; HOT-ROLLED; GT=19MM | $1.1M | 50.00% | 100.00% | $532K |
| 7213990090 | BARS & RODS IRON/NALLOY STEEL; HOT-ROLLED; NESOI | $3K | 50.02% | 100.00% | $1K |
HS10 export codes under this HS6 parent, each with its own page. Source: U.S. Schedule B export classification.
| Code | Description | Export Value |
|---|---|---|
| 7213990000 | BAR&ROD IRN/STL GE 14MM DIAM,COIL,HOT-ROLLED | $742K |
NONALLOY PIG IRON 0.5 PRCNT OR LESS PHOSPHORUS
HS 720110
SMFD IRN/NAL STL LT .25 PCT CRB RECT CS WID 2X THK
HS 720712
SEMIFINISHED PRODUCTS OF ALLOY STEEL NOT STAINLESS
HS 722490
FERROCHROMIUM OVER 4 PERCENT CARBON
HS 720241
FR IOS NAL 600MM AO W TIN CTD OR PLTD UNDR 0.5MM T
HS 721012
FERROUS WASTE & SCRAP NESOI
HS 720449
| Port | Imports | Exports | Balance |
|---|---|---|---|
| PORT HURON, MI | $1.3M | $274K | -$1.1M |
| NEW ORLEANS, LA | $1.5M | -- | -$1.5M |
| DETROIT, MI | $332K | $227K | -$105K |