U.S. imports of Refined Copper Plates, Sheets & Strip Over 0.15 mm Thick, in Coils (HS 740911) totaled $19.7M in August 2026, imported from 25 countries.
Importers of Refined Copper Plates, Sheets & Strip Over 0.15 mm Thick, in Coils paid $6.8M in duties in August 2026, an average duty rate of 50.93% — duty actually collected as a share of the imports that cleared customs, not the published tariff schedule. Refined Copper Plates, Sheets & Strip Over 0.15 mm Thick, in Coils imports of $19.7M in August 2026 ran 13% above the year-to-date monthly average of $17.4M.
Last updated: August 2026 dataRolled refined copper flat-rolled products in coil form — the standard feedstock format for stamping, deep drawing, and continuous fabrication in electrical, roofing, and heat-exchanger applications — are classified here when thickness exceeds 0.15 mm. The US schedule further divides coiled refined copper strip by thickness and width: 7409111000 covers material 5 mm or more thick, while 7409115010 and 7409115050 address sub-5 mm material differentiated by width relative to the 500 mm threshold. Germany and Finland are the primary import sources, supplying high-conductivity grades to US manufacturers. Copper flat-rolled products are subject to Section 232 tariffs, making origin and any applicable exclusions a critical cost variable.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
172 import shipments a month
For sub-5 mm material, the US schedule splits coiled refined copper strip at 500 mm width: product 500 mm or wider falls under 7409115010, while narrower strip falls under 7409115050. Width is measured at the time of importation, so importers should confirm slit-to-width dimensions on the mill certificate match the declared tariff line.
Refined copper flat-rolled products are subject to Section 232 tariffs on steel and aluminum's copper counterpart measures — specifically, copper articles may be covered depending on proclamation scope. Importers should verify current Section 232 applicability and any product-specific exclusions with a licensed customs broker before finalizing landed-cost calculations.
Subheading 2 of 8 in heading 7409
Subheading 740911 · $19.7M of $101.9M
ImportsExports
Imports
$19.7MYoY · free account
Exports
$17.0MYoY · free account
12-mo low · imports
Low · free accountOver the twelve months to August 2026, the U.S. imported $199.5M of Refined Copper Plates, Sheets & Strip Over 0.15 mm Thick, in Coils and exported $175.3M.
Through August 2026. Source: U.S. Census Bureau.
HS10 import codes under this HS6 parent, each with its own page. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Imports for consumption | Average duty rate | Dutiable Share | Duty Collected |
|---|---|---|---|---|---|
| 7409115050 | Ref Cu Sht Strp Plt Un5mm Th A Un 500 Mm Wide Coil | $9.3M | 50.88% | 99.82% | $4.7M |
| 7409111000 | Ref Cu Pl Sht Str Coils 5mm or More Thick | $1.7M | 51.71% | 100.00% | $861K |
| 7409115010 | Ref Cu Pl Sh Str Un5mm Th 500mm or Ov Wdth in Coil | $2.3M | 50.60% | 100.00% | $1.2M |
HS10 export codes under this HS6 parent, each with its own page. Source: U.S. Schedule B export classification.
| Code | Description | Export Value |
|---|---|---|
| 7409110000 | Plts Sheets Strp Refnd Coppr Ov.15mm Thck, Coils | $17.0M |
Import lines come from the U.S. Harmonized Tariff Schedule and export lines from Schedule B. The two are numbered by different agencies, so the same 10-digit code can appear in both tables describing a different product.
Imports · August 2026
origin
Finland and Germany together supply 53% of it.
customs district
destination
entry
rate provision · imports
0.0900% enters free of duty; duty collected equals 50.93% of imports for consumption.
Trade Directory
List your company under HS 740911 — Refined Copper Plates, Sheets & Strip Over 0.15 mm Thick, in Coils, so the companies trading it can find you. Be the first supplier listed.