Loading...
HSChapter 72
U.S. imports of cold-rolled flat-rolled stainless steel, under 600 mm wide (HS 722020) totaled $12.0M in April 2026, traded with 28 countries.
Last updated: April 2026 dataNarrow cold-rolled stainless strip under 600 mm wide encompasses the widest range of precision-finished products in Chapter 72, from razor-blade steel (a dedicated line, 7220208000, for material under 300 mm wide, not over 0.25 mm thick) to medium-gauge strip for automotive and medical device applications. The heading's 18 active 10-digit lines segment product by width sub-band (under 300 mm vs. 300–600 mm), thickness range, and nickel content. India leads US imports, followed by Germany and Sweden, reflecting both commodity-grade and specialty alloy supply chains.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
Line 7220208000 is one of the few HTS lines that classifies stainless steel by its intended end use (razor blade steel) rather than purely by physical dimensions or alloy composition. CBP guidance and Chapter 72 notes define the qualifying specifications; importers claiming this line should be prepared to document that the material meets the applicable hardness, carbon content, and surface-finish standards associated with razor-blade grade steel.
Chapter 72 covers flat-rolled steel products as defined in Note 1(k) to that chapter — products with a rectangular cross-section, rolled in a mill, and meeting specific width-to-thickness ratios. If the product has been further processed into a specific article (e.g., a formed part or a welded tube), it may shift to Chapter 73. When the product is still in strip or sheet form as imported, Chapter 72 governs, and a binding ruling from CBP is advisable for borderline cases.
Monthly import values over time
Supplier Network
Get discovered by U.S. importers searching for HS 722020 — Cold-Rolled Flat-Rolled Stainless Steel, Under 600 mm Wide. Be the first supplier listed.
NONALLOY PIG IRON 0.5 PRCNT OR LESS PHOSPHORUS
HS 720110
SEMIFINISHED PRODUCTS OF ALLOY STEEL NOT STAINLESS
HS 722490
SMFD IRN/NAL STL LT .25 PCT CRB RECT CS WID 2X THK
HS 720712
FR IOS NAL 600MM AO W TIN CTD OR PLTD UNDR 0.5MM T
HS 721012
FERROUS WASTE & SCRAP NESOI, TURNINGS, CHIPS ETC
HS 720441
FERROUS WASTE & SCRAP NESOI
HS 720449
| State | Imports | Exports | Balance |
|---|---|---|---|
| Pennsylvania | $1.2M | $12.8M | +$11.6M |
| Texas | $1.5M | $3.7M | +$2.1M |
| Illinois | $1.9M | $3.0M | +$1.1M |
| Port | Imports | Exports | Balance |
|---|---|---|---|
| WASHINGTON, DC | -- | $9.4M | +$9.4M |
| LAREDO, TX | $1.1M | $3.1M | +$2.0M |
| NEWARK, NJ | $2.4M | $1.4M | -$992K |