Loading...
HSChapter 72
U.S. imports of flat-rolled other alloy steel, under 600mm wide, hot-rolled (HS 722691) totaled $3.2M in April 2026, traded with 9 countries.
Importers of Flat-Rolled Other Alloy Steel, Under 600mm Wide, Hot-Rolled paid $1.3M in duties in April 2026 — an effective duty rate of 48% on $2.8M in dutiable value, based on actual customs collections rather than the published tariff schedule. Flat-Rolled Other Alloy Steel, Under 600mm Wide, Hot-Rolled imports of $3.2M in April 2026 ran 39% above the year-to-date monthly average of $2.3M.
Last updated: April 2026 dataHot-rolled flat products of non-stainless alloy steel narrower than 600 mm span a wide range of specialty grades, including ball-bearing steel and chipper knife steel, each assigned to distinct US tariff lines under this heading. The schedule subdivides by width band (under 300 mm vs. 300 mm to under 600 mm) and by thickness (above or below 4.75 mm), so precise mill measurements are critical to correct classification among lines such as 7226911530, 7226911560, 7226912560, 7226915000, 7226917000, and 7226918000. Canada is the dominant supplier, with Sweden, Japan, and Germany also contributing meaningfully. All entries are subject to Section 232 steel tariffs absent a valid exclusion.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
Ball-bearing steel (typically high-carbon chromium steel meeting ASTM A295 or equivalent) is separately enumerated in lines 7226911530 (300 mm to under 600 mm wide) and has its own classification path. Other alloy steels that do not meet ball-bearing grade specifications fall into the residual 'other alloy steel' lines. Importers must provide mill test reports confirming grade to support the correct line selection.
The US schedule uses 4.75 mm as the dividing line between 'heavy' and 'light' hot-rolled strip. Products at or above 4.75 mm thick classify under 7226915000, while those under 4.75 mm are further split by width into 7226917000 (300–under 600 mm) and 7226918000 (under 300 mm). Accurate thickness measurement from the mill certificate is therefore a prerequisite for correct entry.
| Country | Imports | Exports | Balance |
|---|---|---|---|
| CANADA | $522K | $5.1M | +$4.6M |
| SWEDEN | $1.8M | -- | -$1.8M |
| MEXICO | $300K | $1.4M | +$1.1M |
| GERMANY | $267K | -- | -$267K |
| UNITED KINGDOM | $219K | $14K | -$205K |
Supplier Network
Get discovered by U.S. importers searching for HS 722691 — Flat-Rolled Other Alloy Steel, Under 600mm Wide, Hot-Rolled. Be the first supplier listed.
Monthly import values over time
HS10 import codes under this HS6 parent. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Import Value | Effective Tariff % | Duty Collected |
|---|---|---|---|---|
| 7226915000 | FR OTH ALLOY STL U 600MM W HR 4.75MM AO THCK | $1.6M | 46.58% | $746K |
| 7226917000 | FR OTH ALLOY STL 300-UN600MM W HR UN 4.75MM THCK | $462K | 48.88% | $226K |
| 7226911560 | FR OTH ALLOY STL 300-UN 600MM WD HOT-ROLLD | $452K | 49.56% | $192K |
| 7226918000 | FR OTH ALLOY STL UN 300MM W HR UN 4.75MM THCK | $431K | 50.00% | $66K |
| 7226912560 | FLT RLLD OTH ALLOY STL UNDR 300MM WD HOT-ROLLD | $186K | 48.73% | $81K |
| 7226911530 | FR BLL-BRG STEEL 300-UN 600MM WIDE HOT-ROLLD | $18K | 50.00% | $9K |
| 7226910500 | FLT-RLLD CHIPPR KNFE STL LSS THN 600 MM WDE,HT RLD | $6K | 50.00% | $3K |
FR OTH ALLOY STL U 600MM W HR 4.75MM AO THCK
FR OTH ALLOY STL 300-UN600MM W HR UN 4.75MM THCK
FR OTH ALLOY STL 300-UN 600MM WD HOT-ROLLD
FR OTH ALLOY STL UN 300MM W HR UN 4.75MM THCK
FLT RLLD OTH ALLOY STL UNDR 300MM WD HOT-ROLLD
FR BLL-BRG STEEL 300-UN 600MM WIDE HOT-ROLLD
FLT-RLLD CHIPPR KNFE STL LSS THN 600 MM WDE,HT RLD
HS10 export codes under this HS6 parent. Source: U.S. Schedule B export classification.
| Code | Description | Export Value |
|---|---|---|
| 7226910000 | FLAT-ROLLED,OTHR ALLOY STEEL LT 600MM WID,HOT-ROLL | $6.6M |
FLAT-ROLLED,OTHR ALLOY STEEL LT 600MM WID,HOT-ROLL
4.4M kg
NONALLOY PIG IRON 0.5 PRCNT OR LESS PHOSPHORUS
HS 720110
SEMIFINISHED PRODUCTS OF ALLOY STEEL NOT STAINLESS
HS 722490
SMFD IRN/NAL STL LT .25 PCT CRB RECT CS WID 2X THK
HS 720712
FR IOS NAL 600MM AO W TIN CTD OR PLTD UNDR 0.5MM T
HS 721012
FERROUS WASTE & SCRAP NESOI, TURNINGS, CHIPS ETC
HS 720441
FERROUS WASTE & SCRAP NESOI
HS 720449
| Port | Imports | Exports | Balance |
|---|---|---|---|
| DETROIT, MI | $94K | $3.6M | +$3.5M |
| NORFOLK-NEWPORT NEWS, VA | $1.7M | -- | -$1.7M |
| PORT HURON, MI | $335K | $663K | +$328K |