Loading...
U.S. exports of nickel alloy plates, sheets, strip, and foil (HS 750620) totaled $59.6M in July 2026.
Importers of Nickel Alloy Plates, Sheets, Strip, and Foil paid $1.3M in duties in July 2026 — an effective duty rate of 10% on $12.5M in dutiable value, based on actual customs collections rather than the published tariff schedule. Nickel Alloy Plates, Sheets, Strip, and Foil imports of $14.4M in July 2026 ran 23% above the year-to-date monthly average of $11.7M.
Last updated: July 2026 dataFlat-rolled nickel alloy products — plates, sheets, strip, and foil — serve corrosion-resistant and high-temperature applications in chemical processing, electronics, and battery manufacturing. Thickness drives classification within the heading: foil (7506205000) is distinguished from sheet and strip, and cold-formed flat products (7506201000) are separated from non-cold-formed equivalents (7506203000), with a dedicated line for material not exceeding 0.15 mm thick (7506200500). Japan leads US supply, followed by Germany and South Korea, reflecting those countries' advanced specialty metals rolling capabilities. Section 232 tariffs apply to nickel mill products, and importers should confirm current quota arrangements by country.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
182 shipments/mo
Customs practice generally treats foil as flat-rolled nickel alloy material of very thin gauge — the US schedule specifically identifies material not exceeding 0.15 mm thick under 7506200500 and foil under 7506205000. Strip typically refers to narrower-width flat-rolled product in coil form at heavier gauges. Importers should reference the actual measured thickness and width, supported by mill certificates, when determining the correct 10-digit line.
South Korea's specialty metals industry produces nickel alloy sheet and strip for electronics and battery applications, and imports from South Korea may benefit from KORUS FTA preferential duty treatment depending on the specific tariff line and rules-of-origin qualification. However, Section 232 tariff exposure and any applicable quota arrangements must be evaluated separately, as trade-remedy measures interact with FTA preferences in ways that require case-by-case analysis.
HSChapter 75
Subheading 1 of 2 in heading 7506
Subheading 750620 · $14.4M of $15.0M
Supplier Network
Get discovered by U.S. importers searching for HS 750620 — Nickel Alloy Plates, Sheets, Strip, and Foil. Be the first supplier listed.
HS10 import codes under this HS6 parent, each with its own page. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Import Value | Effective Tariff % | Dutiable Share | Duty Collected |
|---|---|---|---|---|---|
| 7506201000 | Ni Al Plts Sht Strp Cold Formed | $7.5M | 10.59% | 96.72% | $793K |
| 7506203000 | Plts Sht Strp Nickl Alloy not Cold-Formed | $4.8M | 6.28% | 66.15% | $302K |
| 7506200500 | Nickel Alloy, Not Exceeding 0.15mm Thick | $2.1M | 9.14% | 101.04% | $191K |
HS10 export codes under this HS6 parent, each with its own page. Source: U.S. Schedule B export classification.
| Code | Description | Export Value |
|---|---|---|
| 7506201500 | Plates, Sheets and Strip of Nickel Alloys | $57.5M |
| 7506205000 | Foil, Nickel Alloy | $2.1M |
Import lines come from the U.S. Harmonized Tariff Schedule and export lines from Schedule B. The two are numbered by different agencies, so the same 10-digit code can appear in both tables describing a different product.
ImportsExports
Imports
$14.4MYoY · Pro
Exports
$59.6MYoY · Pro
12-mo low · imports
YoY · ProThrough July 2026. Source: U.S. Census Bureau.
Exports · July 2026
destination
Brazil and United Kingdom together take 54% of it.
customs district
origin
entry
rate provision · imports
12.3% enters free of duty; the effective duty rate is 8.94%.