Harmonized System
U.S. exports of Non-Rectangular Aluminum Alloy Plates, Sheets & Strip, Over 0.2 mm Thick (HS 760692) totaled $7.8M in August 2026.
Importers of Non-Rectangular Aluminum Alloy Plates, Sheets & Strip, Over 0.2 mm Thick paid $1.1M in duties in August 2026, an average duty rate of 54.05% — duty actually collected as a share of the imports that cleared customs, not the published tariff schedule.
Last updated: August 2026 dataAluminum alloy plates, sheets, and strip cut or formed into non-rectangular, non-square shapes occupy a narrow but technically important classification, typically serving precision fabrication, aerospace tooling, and specialty industrial applications where standard rectangular mill product is further profiled. The four US tariff lines under this heading split by thickness (above or at/below 6.3 mm) and cladding status, covering both clad and unclad alloy material. Malaysia leads US import supply under this heading, followed by China and Japan — a supplier profile that reflects both regional rolling capacity and downstream processing operations. Section 232 tariffs apply to these imports, and importers should confirm whether any applicable antidumping orders cover the specific alloy series and origin.
AI-written summary of the official U.S. Census Bureau trade figures on this page — verify before relying on it.
53 import shipments a month
A circular or non-rectangular blank that has been cut or sheared from rolled sheet or strip — and has not been further worked by forging, casting, or machining — is classified as a plate, sheet, or strip under 7606.92. Forgings and castings are classified under separate headings (7606 covers only wrought flat-rolled product). The key evidence is the manufacturing method: rolling followed by cutting places the article here; die-forging or casting does not.
Cladding status determines which 10-digit line applies — clad products fall under 7606926055 (over 6.3 mm) or 7606926095 (6.3 mm or less), while unclad products use 7606923025 or 7606923035. Mill test certificates should explicitly state whether the product is clad and identify the cladding alloy, as CBP may request this documentation to verify the correct classification.
Subheading 2 of 4 in heading 7606
Subheading 760692 · $7.8M of $313.0M
Trade Directory
List your company under HS 760692 — Non-Rectangular Aluminum Alloy Plates, Sheets & Strip, Over 0.2 mm Thick, so the companies trading it can find you. Be the first supplier listed.
ImportsExports
Imports
$2.0MYoY · free account
Exports
$7.8MYoY · free account
12-mo low · imports
Low · free accountOver the twelve months to August 2026, the U.S. imported $22.4M of Non-Rectangular Aluminum Alloy Plates, Sheets & Strip, Over 0.2 mm Thick and exported $98.6M.
Through August 2026. Source: U.S. Census Bureau.
HS10 import codes under this HS6 parent, each with its own page. Source: U.S. Harmonized Tariff Schedule.
| Code | Description | Imports for consumption | Average duty rate | Dutiable Share | Duty Collected |
|---|---|---|---|---|---|
| 7606926095 | Aluminum Alloys, Clad, Thickness 6.3 Mm or Less | $932K | 56.52% | 98.34% | $527K |
| 7606923035 | Aluminum Alloys Nt Clad, Thickness 6.3mm or Less | $878K | 52.79% | 100.00% | $464K |
| 7606923025 | Aluminum Alloys not Clad With Thickness Gt 6.3mm | $139K | 43.67% | 71.88% | $61K |
| 7606926055 | Aluminum Alloys, Clad With A Thickness of Gt 6.3mm | $30K | 62.21% | 100.00% | $19K |
HS10 export codes under this HS6 parent, each with its own page. Source: U.S. Schedule B export classification.
Import lines come from the U.S. Harmonized Tariff Schedule and export lines from Schedule B. The two are numbered by different agencies, so the same 10-digit code can appear in both tables describing a different product.
Exports · August 2026
destination
Mexico and Canada together take 88% of it.
customs district
origin
entry
rate provision · imports
2.8% enters free of duty; duty collected equals 54.05% of imports for consumption.